EnggPedia - The Engineering Encyclopedia


Last update06:04:15 AM

Font Size


Menu Style

Back Civil Civil Engineering Dictionary Structural Engineering Deep beams - Concept, Applications, Assumptions & differences between Deep & Simple Beams

Deep beams - Concept, Applications, Assumptions & differences between Deep & Simple Beams

  • PDF

Deep Beams Concept

Deep beams are structural elements loaded as simple beams in which a significant amount of the load is carried to the supports by a compression force combining the load and the reaction. As a result, the strain distribution is no longer considered linear, and the shear deformations become significant when compared to pure flexure.

Floor slabs under horizontal load, short span beams carrying heavy loads, and transfer girders are examples of deep beams.

Deep BeamDeep beam is a beam having large depth/thickness ratio and shear span depth ratio less than 2.5for concentrated load and less than 5.0 for distributed load. Because the geometry of deep beams, their behavior is different with slender beam or intermediate beam.

Difference Between Deep Beams & Simple Beams

The followings are the major different of deep beam element compared with simple beam based on the design assumption, as follows:

  • Two-Dimensional Action, because of the dimension of deep beam they behave as two-dimensional action rather than one-dimensional action.
  • Plane Section Do Not Remain Plane, the assumption of plane section remain plane cannot be used in the deep beam design. The strain distribution is not longer linear.
  • Shear Deformation, the shear deformation cannot be neglected as in the ordinary beam. The stress distribution is not linear even in the elastic stage. At the ultimate limit state the shape of concrete compressive stress block is not parabolic shape again

The Design is based on the ACI Ultimate Strength Design Method and applies to those flexural members having a clear span to depth ratio of less than 4.0. The flexural reinforcement is designed taking into account the reduced lever arm due to the non-linearity of the strains' distribution.

Deep beams play a very significant role in design of mega and as well as small structures. Some times for architectural purposes buildings are designed without using any column for a very large span. In such case if ordinary beams are provided they can cause failure such as flexural failure.

To avoid this problem of construction of some very long span halls etc the concept of deep beams is very effective and durable. But there are also some minor problems with the construction of deep beams as well let

Related Articles to this Article
Reinforcement is generally put into concrete to cater for its relative weakness in tension compared
Seismic retrofitting is the modification of existing structures to make them more resistant to sei
Demand refers to all external actions (self weight) gravity, wind, earthquake, snow all are extern
Shear wall is a structural member used to resist lateral forces i.e parallel to the plane of the w
It is the internal resistance to rotation. Bending moment at a point or at a section is the algebra
Read more similar Articles